Silicone Smoothening Tools
Kit the perfect Silicone finish you've always wanted by using any of our Silicone Smoothening Tools such as the Fugi Kit.
Choose from: FUGI 1, FUGI 3, or FUGI 5. (See Products Listed Below)
Application of masking tape and cleaning afterwards is no longer necessary. Due to the design of the FUGI there is no need to use a releasing agent and the desired form of sealing can be applied without leaving a greasy film. Mistakes can be repaired by simply re-grouting, however, this works only if the sealing grout/caulk has not yet bonded (Cellulite-skin surface).
All pastes, silicone, acrylic and polyurethane can be applied as a sealant, and flexible grouts are able to be formed with the FUGI paying attention to the Manufacturer's instructions.
By holding the FUGI so that it fits seamlessly to the wall and floor, slight pressure is applied so the flexible cutting edges fit well into the wall angle. Always use the absolutely smooth edge for spreading. Work step by step, by only doing short distances. Should the sealant go above the FUGI, stop spreading, and clean FUGI with a household paper towel.
The FUGI can be used on all smooth, rough or wave-like surfaces. When working on uneven surfaces push a little harder onto flexible edges.
|
FUGI-KIT 1
view product
|
FUGI SILICONE REMOVER
view product
