FAQ - tilePANEL

1. Can I use tilePANEL for floors or ceilings?
a. It is not recommended to use tilePANEL on the ceiling as it maybe to heavy or on the floor as it is not slip resistant.

---

2. Can tilePANEL be applied directly to tiles?
a. Yes, provided they are sound.

---

3. Can tilePANEL be applied to plasterboard walls?
a. Yes, directly by adhesive or to sub frames

---

4. Can I use tilePANEL above 2400mm high?
a. Yes, by using a continuous 'H' joint extrusion. Alternatively we supply cleanPANEL, at 3050 x 1220 x 3mm

---

5. Can I order tilePANEL in larger sizes than 2440mm x 1220mm?
a. No, This is the maximum size of the raw materials. But by using a continuous 'H' joint extrusion (see Section 2.6 for extrusions) you can joint the panels. Alternatively we supply cleanPANEL, at 3050 x 1220 x 3mm

---

6. How do I clean tilePANEL?
a. tilePANEL should be cleaned with warm water and a non-abrasive mild detergent. Scouring powders or similar products should not be used.

---

8. How do I get access to services?
a. You can get access to services by using a circular access hatch.

---

9. What is the weight of tilePANEL?
a. 2440mm x 1220mm x 11mm panels weight approximately 15kg.

---

10. What is the warranty on tilePANEL?
a. 10 years from date of purchase, covering cracking, de-lamination and panels remaining watertight, if installed, sealed and maintained according to our published recommendations.

---

11. What other colours are available to order?
a. There are no other colours available from stock.

---

12. How do I cut tilePANEL?


a. Power Saw with Fine Tooth Blade, Decorative face down



a. Handsaw with Fine Tooth Blade, Decorative face up

BE CAREFUL TO MATCH UP TILE LINES

---

13. How do I fit panels at 45°?

a. Fix 2 Type F End Caps to the edge of each tilePANEL, butt together at 45°and apply silicone sealant between the profiles and the wall line.

Enter Our Virual Zone - See What Your Bathroom Could Look Like !