01264 359984

Coloured Silicones Sealant Coverage Chart Silicones & Sealants Specialist Adhesives

Silicone Smoothening Tools Removers & Cleaners Fire Retardant Products Mastic Applicator Guns Silicone Nozzles Emergency Repair Products Tools & Accessories Decorators Caulk

Shower Wall Panels

Expanding Foam

Composite Decking

AB News

Silicones, Sealants & Adhesives

AB Building Products Ltd have been successfully selling Specialists Sealants, Adhesives and Foams for nearly 20 years, winning the ‘Smal... more

Geo-Panel

AB Building Products are proud to announce the release of a Brand New product to our range: Geo-Panel Wide is of very high rigidity and quality. The ... more

Set Up Account

Specialist Adhesives / Firecement HT

Firecement HT

Product Description

Firecement HT

Product:
Firecement HT is a single component ready to use heat resistant sealant which cures to form a hard seal. It withstands temperatures of up to 1500C.

Download Technical Data Sheet Download Safety Data Sheet

Characteristics:

Heat resistant up to 1500C

Does not contain asbesto or other harmful components

Hard setting

Does not crumble or crack after cure

Fire Rating of 120 minutes (Test Report 7830)

Applications:
Sealing of joints and openings at furnaces, heating systems, central heatings, barbecues, etc.
Heat retardant sealing at existing constructions

Packaging:
Colour: black
Packaging: cartridge 310mL

Shelflife:12 months in unopened packaging in a cool and dry storage place at temperatures between +5C and +25. Do not expose to frost.

Surfaces:
Type: concrete, metal, bricks

State of Surface: clean, free of dust and grease

Preparation:
slight moistening of the surface increases adhesion. We recommend a preliminary compatibility test.

Joint Size:
Minimum Width: 5mm
Maximum Width: 20mm

Application:
Method: caulking gun, spatula, trowel
Application temperature: +5C to +30C
Clean: water
Repair with: same material
Health- and Safety Recommendation:
Apply the usual industrial hygiene.

Remarks:
A slight warming of the heating installation during 12 hours after application prevents bubbleforming and improves structure. Do not apply in situations where constant water immersion is possible.