PENOSIL PEST REPELLENT FOAM 299

PENOSIL Pest Repellent Foam 299 is an one-component polyurethane filling straw foam with mouse- and pest-repellent additives for filling and sealing holes, penetrations, gaps and cracks. Adheres well to most materials such as wood, concrete, stone, plaster, metal, PVC and polystyrene.

• With mouse- and pest-repellent additives
• High expansion and good filling properties
• High yield
• Excellent airtightness
• High thermal and sound insulation

APPLICATION AREAS

• Blocking mice, termites and other pests from entering the house.
• Filling holes.
• Insulating penetrations.
• Sealing gaps and cracks.
• Enhancing thermal and sound insulation.
• Reducing the impact of thermal bridges.

ADHERES TO

• Wood
• Concrete
• Stone
• Plaster
• Metal
• PVC
• Polystyrene

Aerosol can 520 ml, content 365 ml

USAGE INSTRUCTIONS

Surfaces must be clean from dust, loose particles and oil stains.

Moisten dry surfaces with water mist to ensure a faster curing time and better end results.

Shake the can vigorously at least 20 times. Remove the cap. Hold the foam can in an upright position with the valve up. Screw the straw applicator tightly onto the foam can valve. Hold the can upside down when extruding the foam. Foam output can be adjusted with the applicator trigger.

Fill the joints up to approx. 50%. In the case of larger joints, apply foam in several layers and moisten slightly between each layer. Excess foam can be cut after it has fully cured.

TIPS

• Air temperature during use: +5°C to +30°C.
• Protect adjacent surfaces with paper, plastic film or other suitable material.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
• Working at low temperatures, the foam can must be prewarmed to room temperature (around +20°C).
• Use Penosil Foam Cleaner 929 to clean tools and surfaces of uncured foam.

LIMITATIONS

• Does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.
• Do not use at temperatures below +5°C.
• Cured foam needs to be covered with a suitable material to protect against UV rays.
• Due to high post-expansion, lighter construction elements must be firmly fixed prior to foam application.
• Do not cover before the foam has fully cured.

With PENOSIL Pest Repellent Foam 299, you’re getting a comprehensive insulation and pest control solution in one, available in a convenient aerosol can. Protect your space and secure your comfort.