PENOSIL EasySpray DIY Foam Insulation
PENOSIL Easy Spray Foam Insulation.
DIY Sprayable Foam Sealant with unique spray applicator for the best insulation experience.
HIGH INSULATION VALUE
The combination of Easy Spray’s special formula and spray applicator creates a unique foam structure with highly efficient acoustic and thermal insulation and great airtightness properties. The thickness of insulation layer is freely selectable, and the number of layers is not limited.
REDUCES COLD BRIDGES
Using accompanying spray nozzle allows to insulate uneven or hard to reach surfaces, where it is impossible to use traditional insulation materials. Sealing all hard to reach parts of construction with unique elastic formulation helps to reduce cold bridges in complex structures and also to reduce the risk of cold bridge appearance due to possible movements in the construction. Spray insulation cause no spacers / cold bridges as in the case of insulation boards.
PREVENTS CONDENSATION
EasySpray All Surfaces sprayable foam can be successfully used on uneven and round surfaces like pipes, tanks and vessels. Insulating cold surfaces with EasySpray sprayable foam is a good remedy to avoid condensation.
Adheres to: Wood, Concrete, Stone, Masonry, Most metals, Drywall, EPS, Roof tiles, PVC, Polystyrene.
- Coverage per can:
1cm layer = 2m2 per can
2cm layer = 1m2 per can
3cm layer = 0.66m2 per can
Bundle package includes:
12 cans of Penosil Easy Spray Foam
1 x Penosil C1 Foam Applicator gun
1 x Penosil Gun & Foam cleaner 500ml
Application areas:
- Covering all types of surfaces to provide thermal and sound insulation.
- All inconvenient places to insulate, where using traditional insulation materials is complicated.
- Insulation of pipes, attics, balconies, garages, cellars, containers, vehicles, tanks and vessels.
- Insulation of lintels, doors, ceilings and other construction parts with the risk of cold bridges.
USAGE INSTRUCTIONS
Put the application nozzle on the tip of the gun. Shake the can vigorously at least 20 times.
Hold the foam can in an upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can.
Rotate the nozzle as needed (for vertical or horizontal application).
Turn the can upside down and start applying. Foam output can be adjusted by the gun trigger.
Apply the foam from a distance of approx. 40 cm from the surface.
The application distance determines the width of the application area – the shorter the distance, the narrower the application area.
TIPS
- The thickness of the foam in one layer should usually not exceed 2 cm. Please consider, that foam expands twice what is sprayed out. The next layer of foam can be applied after 60 minutes if needed.
- The number of layers is not limited.
- At low temperatures the foam can be warmed before work. The temperature of the warming room or water must not exceed +30°C.
- Air temperature during application +10°C to +30°C, best results at +20°C.
- Can temperature during application +18°C to +28°C, best results at +20°C.
- The surfaces must be clean from dust, loose particles and oil.
LIMITATIONS
- Cured foam is less sensitive to UV light and direct sunlight than other conventional one-component polyurethane foams. It is still recommended to cover the cured foam with a suitable opaque sealant, filler, paint or other material to ensure lasting quality features.
- Do not use in places with long-lasting direct contact with water as this reduces thermal insulation properties.
- Availability:
- Available on a Next Working Day delivery
- Weight:
- 750.00 KGS
- Minimum Purchase:
- 1 unit
- Maximum Purchase:
- 99 units
- Brand:
- Penosil
- Foam Cell Type:
- Closed-Cell Foam